| Icon | Command | Hotkey | Description |
| LIN | Ctrl + L | Line |
| ARR | N/A | Arrow |
| 2DFF | N/A | 2D Objects, XY Coordinates from File |
| CPL | N/A | Draw Polyline |
| PLL | N/A | Join Objects into Polyline |
| RECT | N/A | Rectangle |
| POL | N/A | Polygon |
| TAN | N/A | Tangent Line |
| ELL | N/A | Ellipse |
| MLL | N/A | Multi Line |
| SHA | N/A | Shaft |
| SPL | N/A | Spline |
| BOR | N/A | Sheet Border |
| Icon | Command | Hotkey | Description |
 | CCR | N/A | Circle Center Radius |
 | ACR | N/A | Arc Center Radius |
 | CCP | N/A | Circle Center Point |
 | ACP | N/A | Arc Center Point |
 | CR2 | N/A | Circle 2 Points |
 | AR2 | N/A | Arc 2 Points |
 | C3P | N/A | Circle 3 Points |
 | A3P | N/A | Arc 3 Points |
 | APT | N/A | Arc Point Tangent |
 | AT2 | N/A | Arc Tangent to 2 Objects |
 | CT2 | N/A | Circle Tangent to 2 Objects |
 | TG3 | N/A | Circle Tangent to 3 Objects |
 | HOL2 | N/A | Group of Holes |
| Icon | Command | Hotkey | Description |
 | NOTE | N/A | Note (Multiple Lines) |
 | TEX | N/A | Single Text Line |
 | TXI | N/A | Insert Text File |
| Icon | Command | Hotkey | Description |
 | POI | N/A | Point |
 | POC | N/A | Points on Arc |
 | PLN | N/A | Points on Line, Number |
 | PLD | N/A | Points on Line, Distance |
| Icon | Command | Hotkey | Description |
 | HAT | N/A | Hatch, Select Boundary |
 | AHB | N/A | Hatch, Detect Boundaries Automatically |
 | CHH | N/A | Change Hatch Area or Style |
 | CHHP | N/A | Change Hatch Style |
 | CHP | N/A | Create Pattern |
| Icon | Command | Hotkey | Description |
 | AXI | N/A | Axes |
 | CAX | N/A | Circle or Arc Axis |
 | AX2P | N/A | Axis by 2 Points |
 | LAX | N/A | Axis of Rotation Surface |
 | AXPC | N/A | Create Pitch Circle |
| Icon | Command | Hotkey | Description |
 | HDI | N/A | Horizontal Dimension |
 | VDI | N/A | Vertical Dimension |
 | SDI | N/A | Diagonal Dimension |
 | RDI | N/A | Radius Dimension |
 | DDI | N/A | Diameter Dimension |
 | ADI | N/A | Angular Dimension |
 | HPD | N/A | Horizontal Baseline Dimensions |
 | HSD | N/A | Horizontal Serial Dimensions |
 | HDD | N/A | Horizontal Datum Dimensions |
 | VPD | N/A | Vertical Baseline Dimensions |
 | VSD | N/A | Vertical Serial Dimensions |
 | VDD | N/A | Vertical Datum Dimensions |
 | SPD | N/A | Diagonal Baseline Dimensions |
 | SSD | N/A | Diagonal Serial Dimensions |
 | SDD | N/A | Diagonal Datum Dimensions |
 | HDM | N/A | Horizontal Diameter Dimension |
 | VDM | N/A | Vertical Diameter Dimension |
 | SDM | N/A | Diagonal Diameter Dimension |
 | HTH | N/A | Horizontal Thread Dimension |
 | VTH | N/A | Vertical Thread Dimension |
 | STH | N/A | Diagonal Thread Dimension |
 | THR | N/A | Thread Dimensions |
 | STXA | N/A | Single Text Arrow |
 | MTXA | N/A | Multiple Text Arrow |
 | LDR | N/A | Leader |
 | CHLDR | N/A | Check and Update Leaders |
 | FSY | N/A | Finish Symbols |
 | WSY | N/A | Welding Symbols |
 | TSY | N/A | Tolerance Symbols |
 | DCC | N/A | Displayed Cursor Coordinates |
 | ORTA | N/A | Ortho Modes, Leading Lines |
 | ORT | F11 | Drawing in Ortho Mode |
 | ORTC | N/A | Ortho, if Close to Vertical/Horizontal |
 | ORTH | N/A | Ortho, Next Horizontal |
 | ORTV | N/A | Ortho, Next Vertical |
 | OMO | Ctrl + F11 | Turn off Ortho Mode |
 | ORTS | N/A | Ortho, Set Close Angle |
 | STP | F9 | Drawing in Increment Mode |
 | STO | N/A | Increment Mode Off |
 | STS | N/A | Set Increments of Cursor Movement |
| Icon | Command | Hotkey | Description |
 | DOB | Ctrl + D | Delete 2D Objects |
 | CPY | Ctrl + C | Copy to Clipboard |
 | PAS | Ctrl + V | Paste |
 | CCUT | Ctrl + X | Delete - Cut to Clipboard |
 | ROL | N/A | Remove Previous View Export |
 | BLA | Ctrl + B | Blank 2D Objects |
 | UBL | Ctrl + U | Unblank 2D Objects |
 | ETX | N/A | Edit Text |
 | MTL | N/A | Move Text Vertically |
 | TWD | N/A | Text Width |
 | TAC | N/A | Change Text Style |
 | EDM | N/A | Edit Dimension |
 | EDI | N/A | Edit Dimension Text |
 | MDT | N/A | Move Dimension Text |
 | EDS | N/A | Change Dimension Style |
 | EXP | N/A | Explode |
 | BLN | N/A | Break Line |
 | MLA | N/A | Change Layer |
 | MPE | N/A | Change Color |
 | MLT | N/A | Change Line Type |
 | BPO | N/A | Divide by Point |
 | BBO | N/A | Divide by Curve |
 | TBO | N/A | Trim |
 | EBO | N/A | Extend |
 | CHLL | N/A | Change Line Length |
 | CHAR | N/A | Change Arc Radius |
 | CEC | N/A | Circle from Arc |
 | CCO | N/A | Corner |
 | RSG | N/A | Remove Segment |
 | CHM | Ctrl + R | Chamfer 2D Corner |
 | RND | Ctrl + F | Fillet 2D Corner |
 | JTX | N/A | Align Text |
 | ESP | N/A | Edit Spline |
 | BTF | N/A | Explode Font |
| Icon | Command | Hotkey | Description |
 | MOV | Ctrl + T | Translate or Copy 2D Objects |
 | DRG | N/A | Dynamic Translation |
 | ROT | N/A | Rotate or Copy 2D objects |
 | DRO | N/A | Dynamic Rotation |
 | SCA | N/A | Scale |
 | DSC | N/A | Dynamic Scaling |
 | DTR | N/A | Translate and Rotate |
 | MIR | N/A | Mirror |
 | OFFS | N/A | Offset |
 | SOB | N/A | Stretch |
 | STRVECT | N/A | Stretch by Vector |
 | CTA | N/A | Array Copy |
 | DST | N/A | Stretch to Direction |
| Icon | Command | Hotkey | Description |
 | GRI | Ctrl + G | Grid |
 | CCL | N/A | Create Multiple Construction Lines |
 | HCL | N/A | Horizontal C.L. |
 | VCL | N/A | Vertical C.L. |
 | HVCO | N/A | Horizontal/Vertical C.L. Offset |
 | HVCP | N/A | Horizontal/Vertical C.L. from Point |
 | HCT | N/A | Horizontal C.L. Tangent |
 | VCT | N/A | Vertical C.L. Tangent |
 | 1CL | N/A | Angle 1 C.L. |
 | 1CI | N/A | Angle 1 C.L. Offset |
 | 1CF | N/A | Angle 1 C.L. from Point |
 | 1CT | N/A | Angle 1 C.L. Tangent |
 | 1CS | N/A | Define Angle 1 |
 | 2CL | N/A | Angle 2 C.L. |
 | 2CI | N/A | Angle 2 C.L. Offset |
 | 2CF | N/A | Angle 2 C.L. from Point |
 | 2CT | N/A | Angle 2 C.L. Tangent |
 | 2CS | N/A | Define Angle 2 |
 | DCL | N/A | Delete Selected Construction Line |
 | DAH | N/A | Delete All Horizontal Construction Lines |
 | DAV | N/A | Delete All Vertical Construction Lines |
 | DA1 | N/A | Delete All Angular Construction Lines |
 | DACL | N/A | Delete All Construction Lines |
| Icon | Command | Hotkey | Description |
 | BLS | N/A | Save Block |
 | BLI | Ctrl + K | Insert Block |
 | BLC | N/A | Create Block |
 | BLE | N/A | Edit Block |
 | BIE | N/A | Change Insertion Point |
 | BAE | N/A | Edit Block Attributes |
| Icon | Command | Hotkey | Description |
 | SYM | N/A | Symbols |
| Icon | Command | Hotkey | Description |
 | COO | N/A | 2D Coordinates |
 | DIS | N/A | 2D Distance |
 | ANG | N/A | Angle |
 | ODT | N/A | 2D Object Information |
 | CHL | N/A | Highlight Layer |
 | 2DA | N/A | Calculate 2D Section Properties |
 | 2DP | N/A | 2D Drawing Area Properties |
| Icon | Command | Hotkey | Description |
 | ATW | N/A | Add to Work Set |
 | RFW | N/A | Delete from Work Set |
 | CLW | N/A | Clear Work Set |
 | CHW | N/A | Highlight Work Set |
| Icon | Command | Hotkey | Description |
 | TXA | N/A | Text Style |
 | DMA | N/A | Dimension Style |
 | ARA | N/A | Arrow Style |
 | SWS | N/A | Weld Symbol Settings |
 | FMT | N/A | Change Drawing Format |
 | SCH | N/A | Change Drawing Scale |
 | UCO | N/A | Change Center of Coordinates |
 | SBD | N/A | Sheet Borders Definition |
 | LAY | N/A | Create, Edit or Delete Layers |
| Icon | Command | Hotkey | Description |
 | ZPR | N/A | Undo View |
 | ZRD | N/A | Redo View |
 | RDR | F6 | Redraw |
 | SON | N/A | Old/New View Export, Updated 2D |
 | ZWI | F5 | Zoom Window |
 | ZALL | N/A | Zoom All |
 | ZFO | N/A | Zoom Drawing Format |
 | REG | N/A | Regenerate |
| Icon | Command | Hotkey | Description |
 | DOP | Ctrl + N | New |
 | DAD | Ctrl + O | Open |
 | RCFA | N/A | Open Recent Files - History |
 | CLO | Ctrl + F4 | Close |
 | DSV | Ctrl + S | Save |
 | SVA | N/A | Save As |
 | DPS | N/A | Save Selected |
 | DPO | N/A | Insert Objects from File |
 | SVALL | N/A | Save All Changed |
 | REOPEN | N/A | Reopen Unchanged Current File |
 | TXV | N/A | List Text Files |
 | WIN | Ctrl + 3 | Windows |
 | NDW | N/A | New Document from Current Document |
 | SWD | Ctrl + TAB | Activate Previous Window |
 | FCO | N/A | Batch File Conversion |
 | DEF | N/A | Current File Attributes as Default |
 | INFF | N/A | Information about Current File Changes |
 | RESET | Ctrl + Alt + D | Restart of VariCAD |
 | EXT | N/A | Exit |
| Icon | Command | Hotkey | Description |
 | CFG | N/A | Complete System Settings |
 | TLBS | N/A | Toolbar Settings |
 | CBS | N/A | Create Backup of All Settings |
 | RBS | N/A | Restore Settings from Backup |
 | CHU | N/A | Change Current Units – mm, inch |
| Icon | Command | Hotkey | Description |
 | BMP | N/A | Create Bitmap File from 3D |
 | WPR | Ctrl + P | |
 | WPS | N/A | Print to System Printer |
 | BPRP | N/A | Batch Print, from Predefined List |
 | BPRW | N/A | Batch Print, or Define List to Print |
| Icon | Command | Hotkey | Description |
 | QDM | N/A | Tips and Tricks |
 | HFU | F1 | Context Help |
 | MAN | N/A | Reference Manual |
 | DMAN | N/A | Display View Functions Related Help |
 | TIPS | N/A | Tips and Tricks from Manual |
| Icon | Command | Hotkey | Description |
 | 2D | Alt + 2 | Switch to 2D |
 | 3D | Alt + 3 | Switch to 3D |
 | DRP | Alt + S | Sketching |
 | RED | Ctrl + Y | Redo |
 | UND | Ctrl + Z | Undo |
 | INFO | Shift + F3 | List of VariCAD Directories |
 | INFS | N/A | About |
 | CAL | Shift + F9 | Calculator |
 | HWTEST | N/A | Hardware Test |
| Icon | Command | Hotkey | Description |
 | ZSV | N/A | Save View |
 | ZRE | N/A | Restore View |
 | RS1 | N/A | Restore View 1 |
 | RS2 | N/A | Restore View 2 |
 | RS3 | N/A | Restore View 3 |
 | RS4 | N/A | Restore View 4 |
 | RS5 | N/A | Restore View 5 |
 | RS6 | N/A | Restore View 6 |
 | RS7 | N/A | Restore View 7 |
 | RS8 | N/A | Restore View 8 |
 | SV1 | N/A | Save as View 1 |
 | SV2 | N/A | Save as View 2 |
 | SV3 | N/A | Save as View 3 |
 | SV4 | N/A | Save as View 4 |
 | SV5 | N/A | Save as View 5 |
 | SV6 | N/A | Save as View 6 |
 | SV7 | N/A | Save as View 7 |
 | SV8 | N/A | Save as View 8 |
| Icon | Command | Hotkey | Description |
 | SXDP | N/A | 2D Object as Solid X Sketching Plane |
 | PXDP | N/A | 2D Object as Patch X Sketching Plane |
 | THL | N/A | Thick/Thin 2D Outlines |
 | ZALLP | N/A | Zoom All in Drawing Plane |
 | DPV | N/A | Drawing Perpendicular to View |
 | ZWD | N/A | Zoom Window in Sketching Plane |
 | VCNI2 | N/A | Define View Rotation Center in Sketching Plane |
| Icon | Command | Hotkey | Description |
 | OSHELL | N/A | Converts a Solid to Open Shell |
 | PTCHS | N/A | Converts a Solid to Set of Patches |
 | PTCHM | N/A | Converts a Solid to Object with Missing Patches |
 | DOS | N/A | Displays All Open Solids |
 | DHOS | N/A | Displays All Holes in Open Solids |
 | DEHOS | N/A | Displays Holes in Open Solids around Deleted Patch |
| Icon | Command | Hotkey | Description |
 | REGALL | N/A | Regenerate All 3D Objects |
 | REGTRAN | N/A | Regenerate Transformations |
 | RECOVERY | N/A | File Recovery |
 | TOIMP | N/A | Converts to Imported Object, Destroys Creation History |
 | INSIDEOUT | N/A | Reverse All Normals of Solid |
 | INSOUTSEL | N/A | Reverse Normals of Selected Patches |
| Icon | Command | Hotkey | Description |
 | PRS | N/A | Box |
 | CYL | N/A | Cylinder |
 | PEL | N/A | Pipe Elbow |
 | TPY | N/A | Pyramid |
 | PIP | N/A | Pipe |
 | CPI | N/A | Cone Pipe |
 | CON | N/A | Cone |
 | ELW | N/A | Solid Elbow |
 | SPH | N/A | Sphere |
| Icon | Command | Hotkey | Description |
 | RSO | N/A | Full Rotation |
 | ESO | N/A | Extrude |
 | RSOP | N/A | Partial Rotation |
 | MPL | N/A | Lofting, Multiple Profiles Lofting |
 | HLX | N/A | Helix |
 | MPLR | N/A | Rotate and Loft between Two Planes |
 | LB2P | N/A | Loft between Two Planes' Outlines |
| Icon | Command | Hotkey | Description |
 | STC | N/A | Translate, Rotate, Copy Solids |
 | CHAX | N/A | Permanent Change of Imported Solid Axes |
 | PAR | N/A | Parameters |
 | CST | N/A | Geometric Constraints among Solid Elements |
 | CSTS | N/A | Geometric Constraints among Entire Solids |
 | RMS | Ctrl + D | Delete Solids or Blending |
| CPY | Ctrl + C | Copy to Clipboard |
| PAS | Ctrl + V | Paste |
| CCUT | Ctrl + X | Delete - Cut to Clipboard |
 | CS3 | N/A | Change Color |
 | BL3 | Ctrl + B | Blank |
 | UB3 | Ctrl + U | Unblank |
 | MSO | N/A | Edit Solid or Blending |
 | SHC | N/A | Shade/Wireframe/Transparent Selected Solids |
 | MIRR3 | N/A | Mirror Solid |
 | RSSO | N/A | Scale Solid |
| Icon | Command | Hotkey | Description |
 | TXT3D | N/A | Create 3D Text |
 | OFP | N/A | Create Offset Patches (Shells) |
 | PIPES | N/A | Create Pipes in Space |
 | WIRES | N/A | Create Wires in Space |
 | SWP | N/A | Sweep 2D Profile along 3D Path |
 | THH | N/A | Threaded Hole |
 | THS | N/A | Threaded Cylinder (Screw) |
 | OTC | N/A | Outer Thread Cutting Tool |
| Icon | Command | Hotkey | Description |
 | CUT | N/A | Cut, Delete Cutting Solid |
 | ADD | Ctrl + A | Add Solid |
 | CUTS | N/A | Cut, Keep Cutting Solid |
 | TRX | N/A | Explode Boolean Tree |
 | CUTPS | N/A | Selective Cut, Delete Cutting Solid |
 | ADDPC | N/A | Selective Add |
 | CPSS | N/A | Selective Cut, Keep Cutting Solid |
 | SIN | N/A | Solid Intersection |
 | NADD | N/A | Add Solid, Perform No Intersection |
 | TREE | N/A | Boolean Tree Structure Editing |
| Icon | Command | Hotkey | Description |
 | HOL | N/A | Hole |
 | MIL | N/A | Cut by a Box (Mill) |
 | MILX | N/A | Cut by an Extruded Solid (Mill) |
 | GRV | N/A | Groove |
 | RN3 | Ctrl + F | 3D Fillet |
 | CH3 | Ctrl + R | 3D Chamfer |
| Icon | Command | Hotkey | Description |
 | CRT | N/A | Interference between Two Groups |
 | CRTR | N/A | Repeat Interference Check between Two Groups |
 | CHRD | N/A | Display Interferences |
 | ASCH | N/A | All Interferences |
 | ASCHN | N/A | Interference without Selected |
 | ASCHS | N/A | Interference Selected vs. Rest |
 | ASCHB | N/A | Interference within Selected |
| Icon | Command | Hotkey | Description |
 | EXV | N/A | Exploded View of Assembly |
 | ASTR | N/A | Assembly Tree Scheme |
 | OATR | N/A | Assembly Tree Files |
 | EDE | N/A | Open Part File from Assembly |
 | EDIA | N/A | Edit Part or Sub-Assembly in Assembly Environment |
 | RAI | N/A | Regenerate Assembly |
 | DIA | N/A | Create Part, Save It into New Part File |
 | DEE | N/A | Define Part to be Inserted into Assembly |
 | CDE | N/A | Break Definition of Part to be Inserted into Assembly |
 | ROI | N/A | Change Definition of Part to be Inserted into Assembly |
 | SBA | N/A | Create Sub-Assembly, Save It into New Sub-Assembly File |
 | SBE | N/A | Define or Change Sub-Assembly to be Inserted into Assembly |
 | CSB | N/A | Break Definition of Sub-Assembly to be Inserted into Assembly |
 | ASI | N/A | Add Solids to Identical Copies |
 | RSI | N/A | Break Identical Copy Link |
 | RIC | N/A | Break Identical Copy Group |
 | CSI | N/A | Break Link from Part |
 | CAI | N/A | Break All Links from Parts |
| Icon | Command | Hotkey | Description |
 | 32E | N/A | 2D View from 3D |
 | 32EN | N/A | Update 2D after 3D Changes |
 | 32SET | N/A | Update 2D after 3D Changes Setting |
 | SEM | Ctrl + F2 | 3D Section Management |
| Icon | Command | Hotkey | Description |
 | HOD | N/A | Highlight Objects Related to 3D View Exports |
 | OOD | N/A | Highlight Objects Off |
 | ZOD | N/A | Zoom in on Highlighted Dimensions |
 | ROD | N/A | Remove Objects Unable to be Updated by 3D View Export |
| Icon | Command | Hotkey | Description |
 | 3DCO | N/A | 3D Coordinates |
 | 3DD | N/A | 3D Distance |
 | STAT | N/A | 3D Space Information |
 | ODT3 | N/A | 3D Object Information |
 | DPP | N/A | Distance Point Plane |
 | DPC | N/A | Distance Point Cylinder |
 | SCY | N/A | Cylinder Dimensions |
 | APL | N/A | Angle between Planes |
 | SDE | N/A | Surface Development |
 | VOL | N/A | Volume, Mass, Center of Gravity |
 | SAR | N/A | Surface Area |
 | SELSAR | N/A | Surface Area of Selected Patches |
 | MIN | N/A | Moment of Inertia |
 | CPP | N/A | Check Pipes |
 | PATCHI | N/A | 3D Patch Information |
 | CURVI | N/A | 3D Curve Information |
| Icon | Command | Hotkey | Description |
 | 3GR | Ctrl + F1 | 3D Groups Management |
| Icon | Command | Hotkey | Description |
 | SRD | N/A | Enhanced Rendering |
| ZPR | N/A | Undo View |
| ZRD | N/A | Redo View |
 | VLE | N/A | Left View |
 | VRI | N/A | Right View |
 | VFR | N/A | Front View |
 | VBA | N/A | Back View |
 | VTO | N/A | Top View |
 | VBO | N/A | Bottom View |
 | ISO1 | N/A | Isometric View 1 |
 | ISO2 | N/A | Isometric View 2 |
 | PRV | N/A | Predefined View |
 | VCN | N/A | Auto View Rotation Center |
 | VCNI | N/A | Define View Rotation Center |
 | X90 | N/A | Rotate View Around X 90 Degrees |
 | X180 | N/A | Rotate View Around X 180 Degrees |
 | X270 | N/A | Rotate View Around X 270 Degrees |
 | Y90 | N/A | Rotate View Around Y 90 Degrees |
 | Y180 | N/A | Rotate View Around Y 180 Degrees |
 | Y270 | N/A | Rotate View Around Y 270 Degrees |
 | Z90 | N/A | Rotate View Z 90 Degrees |
 | Z180 | N/A | Rotate View Z 180 Degrees |
 | Z270 | N/A | Rotate View Z 270 Degrees |
| ZRD | N/A | Redo View |
 | SHW | N/A | Shade/Wireframe Entire Display |
 | RNP | N/A | View to Plane |
 | 3DMR | N/A | 3D Mouse Rotation On/Off |
 | 3DMZ | N/A | 3D Mouse Pan/Zoom On/Off |
 | 3DMRON | N/A | 3D Mouse Rotation On |
| Icon | Command | Hotkey | Description |
 | BOM | Ctrl + E | Create BOM at Basic Level |
 | DSS3 | N/A | Create BOM Containing Assembly |
 | BOMG | N/A | Create BOM from 3D Assembly Group |
 | SPO | N/A | Supplementary Objects |
 | SAT | N/A | Solid Attributes |
 | MAT | N/A | Define Mass Density and Material |
 | DMAT | N/A | Define or Edit Material Table |
 | MTC | N/A | Change Identical Attributes |
 | ATL | N/A | Attributes from List |
 | ATC | N/A | Check Attributes |
 | AAT | N/A | Assembly/Part Attributes, Fill Title Blocks |
 | AAT2 | N/A | Fill Title Block, Define Attributes |
 | ATM | N/A | BOM, Attributes and Title Blocks Settings |
| Icon | Command | Hotkey | Description |
 | TSP | N/A | Tension Spring Calculation |
 | CSP | N/A | Compression Spring Calculation |
 | SQK | N/A | Square Key Calculation |
 | SSC | N/A | Spline Shaft Calculation |
 | RPC | N/A | Round Pin Calculation |
 | BCC | N/A | Bolt Connection Calculation |
 | BEN | N/A | Shaft and Beam Calculation |
 | FDC | N/A | Spur Gear Calculation |
 | CDC | N/A | Straight Bevel Gear Calculation |
 | VBE | N/A | V-Belt Calculation |
 | RLC | N/A | Roller Chain Drive Calculation |
 | SKF | N/A | SKF Bearings Calculation |
| Icon | Command | Hotkey | Description |
 | INH | N/A | Home Page |
 | YOUTUBE | N/A | YouTube VariCAD Channel |
 | N/A | Facebook VariCAD Page | |
 | ELCD | N/A | License Code |
 | TREG | N/A | Registration |
 | PCHS | N/A | Online Purchase |
 | INST | N/A | Web Browser Settings |
 | INN | N/A | What's New Page |
 | INI | N/A | Upgrade |
 | INF | N/A | Feedback |
 | FAQ | N/A | FAQ |
| Hotkey | Icon | Command | Description |
| Ctrl + A | | ADD | Add Solid |
| Ctrl + C | | CPY | Select Objects to Clipboard |
| Ctrl + E | | BOM | Bill of Material |
| Ctrl + G | | GRI | Grid |
| Ctrl + K | | BLI | Insert Block |
| Ctrl + L | | LIN | Line |
| Ctrl + N | | DOP | New |
| Ctrl + O | | DAD | Open |
| Ctrl + P | | WPR | |
| Ctrl + S | | DSV | Save |
| Ctrl + T | | MOV | Translate or Copy 2D Objects |
| Ctrl + V | | PAS | Objects from Clipboard |
| Ctrl + W | | CUT | Cut Solid |
| Ctrl + X | | CCUT | Delete Objects, Put to Clipboard |
| Ctrl + Y | | RED | Redo |
| Ctrl + Z | | UND | Undo |
| F1 | | HFU | Context-Sensitive Help |
| F2 | | DSV | Save |
| F5 |  | ZOOM | Zoom |
| F6 | | RDR | Redraw |
| F9 | | STP | Drawing in Increment Mode |
| F11 | | ORT | Drawing in Ortho Mode |
| Shift + F3 | | INFO | Information |
| Shift + F9 | | CAL | Calculator |
| Shift + F11 | | OMO | Turn off Ortho Mode |
| Ctrl + F1 | | 3GR | 3D Groups Management |
| Ctrl + F2 | | SEC | 3D Sections Management |
| Ctrl + F4 | | CLO | Close |
| Ctrl + 3 | | WIN | Windows |
| Ctrl + TAB | | SWD | Activate Previous Window |
| Alt + 2 | | 2D | Switch to 2D |
| Alt + 3 | | 3D | Switch to 3D |
| Alt + S | | DRP | Sketching |
| Hotkey | Icon | Command | Description |
| Ctrl + B |  | BLANK | Blank Objects |
| Ctrl + D |  | DELETE | Delete Objects |
| Ctrl + C | | CPY | Copy |
| Ctrl + V | | PAS | Paste |
| Ctrl + X | | CCUT | Delete Objects, Put to Clipboard |
| Ctrl + F |  | FILLET | Fillet Edge/Corner |
| Ctrl + R |  | CHAMFER | Chamfer Edge/Corner |
| Ctrl + U |  | UNBLANK | Unblank Objects |
| Icon | Command | Description |
| RS1 | Restore View 1 |
| RS2 | Restore View 2 |
| RS3 | Restore View 3 |
| RS4 | Restore View 4 |
| RS5 | Restore View 5 |
| RS6 | Restore View 6 |
| RS7 | Restore View 7 |
| RS8 | Restore View 8 |
| ZSV | Save View |
| ZALL | Zoom All |
| ZWI | Zoom Window |
| ZFO | Zoom Drawing Format |
| ZPR | Undo View |
| ZRD | Redo View |
| VLE | Left View |
| VRI | Right View |
| VFR | Front View |
| VBA | Back View |
| VTO | Top View |
| VBO | Bottom View |
| ISO1 | Isometric View 1 |
| ISO2 | Isometric View 2 |
| X90 | Rotate View X 90 Degrees |
| X180 | Rotate View X 180 Degrees |
| X270 | Rotate View X 270 Degrees |
| Y90 | Rotate View Y 90 Degrees |
| Y180 | Rotate View Y 180 Degrees |
| Y270 | Rotate View Y 270 Degrees |
| Z90 | Rotate View Z 90 Degrees |
| Z180 | Rotate View Z 180 Degrees |
| Z270 | Rotate View Z 270 Degrees |
| RNP | View Perpendicular to Plane |
| PRV | Predefined View |
| VCN | Auto View Rotation Center |
| VCNI | Define View Rotation Center |
| SHW | Shade/Wireframe Entire Display |
| ODT3 | 3D Object Information |
| SON | Old/New View Export, Updated 2D |
| STP | 2D Drawing in Increment Mode |
| ORT | 2D Drawing in Ortho Mode |
| ORTH | Ortho Alternating Horizontal/Vertical |
| ORTV | Ortho Alternating Vertical/Horizontal |
| OMO | Turn off Ortho Mode |
| GRI | 2D Grid |
| UCO | 2D User Origin |
| STAT | 3D Space Information |
| 3DD | 3D Distance |
| 3DCO | 3D Coordinates |
| DPP | Distance Point Plane |
| DPC | Distance Point Cylinder |
| APL | Angle between Planes |
| SCY | Cylinder Dimensions |
| HFU | Context-Sensitive Help |
|
|